Teledyne T3DSO1000 Programming Manual page 62

EXAMPLE
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
• For T3DSO1000 series, when the Digital
function is on, the following command sets the
threshold of D0-D7 to LVLCMOS3.3.
Command message:
C1:DGTH CMOS3.3
• For T3DSO1000 series, when the Digital
function is on, the following command sets the
threshold of D8-D15 to 3 V.
Command message:
C2:DGTH CUSTOM,3V
Valid?
yes
no
62