Teledyne T3DSO1000 Programming Manual page 131

REFERENCE
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
REF_LOCATION | REFLA
The REF_LOCATION command selects the
current reference channel.
The REF_LOCATION? query returns the
current reference channel.
REF_LOCATION <location>
<location>:= {REFA,REFB,REFC,REFD}
REF_LOCATION?
REF_LOCATION <location>
The following command selects REFA as
the current reference channel.
Command message:
REFLA REFA
Valid?
no
yes
Command /Query
131