Teledyne T3DSO1000 Programming Manual page 73

DISPLAY
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
PERSIST_SETUP | PESU
The PERSIST_SETUP command selects the
persistence duration of the display, in seconds, in
persistence mode.
The PERSIST_SETUP? query returns the
current status of the persistence.
PERSIST_SETUP <time>
Models
T3DSO1000
Others
Note:
• See models on
page
•
See the command PERS in Obsolete
Commands for Old Models to set persist off .
• Options of <time> vary from models. See the
data sheet or the display menu of the
oscilloscope for details.
PERSIST_SETUP?
PERSIST_SETUP <time>
The following command sets the variable
persistence at 5 seconds.
Command message:
PESU 5
Command /Query
<time>:=
{OFF,INFINITE,1,5,10,30}
{INFINITE,1,5,10,30}
14.
73