Teledyne T3DSO1000 Programming Manual page 2

Version Declaration
This chapter indicates the modifications of commands in the most recent
release of the programming guide version.
Introduction
Manual version 1.2 describes all the currently available commands. Some
of the commands vary between the oscilloscope series, and these will be
annotated in the description of command.
The following are the main revisions:
� Delete the Table of Commands & Queries, and all the instructions are
classified according to the functional modules.
� Removed incorrect instructions, added instructions for GEN and DIGITAL
modules.
� Add two new communication features: Telnet and Socket, visible in
"Programming Overview-Remote Control".
� Detailed programming instances for instructions (WF?/SCDP) to make
it easier to understand.
� Support obtaining waveform data of Digital channel and Math.
Digital Oscilloscope Series
2