Table of Contents
Advertisement
CHANNEL
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
The SKEW command sets the channel-to-
channel skew factor for the specified
channel. Each analog channel can be
adjusted + or -100 ns for a total of 200 ns
difference between channels. You can use
the oscilloscope's skew control to remove
cable-delay errors between channels.
The SKEW? query returns the skew value
of the specified trace.
<trace>:SKEW <skew>
<trace>:={C1,C2,C3,C4}
<skew>:= -100 ns to +100 ns.
<trace>:SKEW?
<trace>:SKEW <skew>
Model
T3DSO1000
T3DSO2000
The following command sets skew value of
Channel 1 to 3ns.
Command message:
C1:SKEW 3NS
SKEW
Command/Query
Format of <skew>
Numerical
value
in E-notation
with
SI
unit,
such
9.99E-08S.
Numerical
value
with
measurement
unit
and
physical
unit, such as 0.00ns.
45
as
Hide quick links:
Advertisement
Table of Contents
