HISTORY
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
RELATED COMMANDS
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
HISTORY_LIST | HSLST
The HISTORY_LIST command is used to set
the state of history list.
The HISTORY_LIST? query returns the current
state of history list.
HSLST <state>
<state>:={ON,OFF}
Note:
This command can only be used when History
function is turned on.
HSLST?
HSLST <state>
When History function is on, the following
command sets the state of history list to ON.
Command message:
HSLST ON
HSMD
Valid?
no
yes
Command/ Query
78