Safety Instructions Symbols These symbols alert you to important safety considerations. WARNING, HIGH VOLTAGE. Risk of electric shock or burn. CAUTION of damage to probe or instrument, or WARNING of hazard to health. Attend to the accompanying information to protect against personal injury or damage.
Page 4
Product Description The T3NFP3 probe set comprises of a set of three magnetic field probes (H) and an electric field probe (E) for radiated emissions pre-compliance tests of printed circuit boards and other devices including components, connectors, wiring, power supplies, etc.
Application The probes are used to detect magnetic field intensity and detect disturbance emissions sources. Spectrum Analyzer or Oscilloscope T3NFP3 Near Field Probe Wideband preamplifier There are two methods of connecting the probes to the spectrum Analyzer or oscilloscope, either directly or via a wideband preamplifier (not supplied) as shown above.
Page 8
The T3NFP3 kit comprises of: 1. Four Near Field Probes with SMB output connectors. 2. An SMB to SMA connecting cable. 3. An SMA to N Type adaptor. Near Field Probes Probe SMB Output Connectors Sensing SMB(F) to SMA(M) Connecting...
The probes are subject to disposal and recycling regulations that vary by country and region. Many countries prohibit the disposal of waste electronic equipment in standard waste receptacles. For more information about proper disposal and recycling of your Teledyne LeCroy product, visit teledynelecroy.com/recycle.