Teledyne T3DSO1000 Programming Manual page 64

DIGITAL
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
The TRACE command turns digital display on
or off for the specified channel.
The TRACE? query returns the current digital
display setting for the specified channel.
<digital>:TRACE <state>
<digital>:={D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,
D10,D11,D12,D13,D14,D15}
<state>:={OFF,ON}
<digital>:TRACE?
<digital>:TRACE <state>
For T3DSO1000 series, the following command
sets D8 display on.
Command message:
D8:TRACE ON
Valid?
no
yes
TRACE | TRA
Command /Query
64