Teledyne T3DSO1000 Programming Manual page 152

SYSTEM
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
SCREEN_SAVE | SCSV
The SCREEN_SAVE command controls
the automatic
automatically shuts down the internal color
monitor after a preset time.
The SCREEN_SAVE?
whether the automatic screen saver feature is
on.
Note:
When the screen saver is enabled, the
oscilloscope is still fully functional.
SCREEN_SAVE <time>
<time>:={OFF,1MIN,5MIN,10MIN,30MIN
,60MIN}
• OFF — Do not use screen saver.
• Others — When the oscilloscope enters
the idle state and holds for the specified
time, screen saver will be enabled.
SCREEN_SAVE?
SCREEN_SAVE <time>
The following command sets the automatic
screen saver to 10 minutes.
Command message:
SCSV 10MIN
Command/Query
screen saver, which
query returns
152