Teledyne T3DSO1000 Programming Manual page 130

REFERENCE
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
RELATED COMMANDS
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
REF_DISPLAY | REFDS
The REF_DISPLAY command enables or
disables the current reference channel
shown on the screen.
The REF_DISPLAY? query returns whether
the current reference channel shows on the
screen.
REF_ DISPLAY <state>
<state>:= {ON,OFF}
Note:
Only used when the current reference
channel has been stored, and the Reference
function is enable.
REF_ DISPLAY?
REF_ DISPLAY <state>
The following command displays the
waveform of the current reference channel.
Command message:
REFDS ON
REFCL
Valid?
no
yes
Command /Query
130