Teledyne T3DSO1000 Programming Manual page 71

DISPLAY
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
The INTENSITY command sets the intensity
level of the grid or the trace.
The INTENSITY? query returns the grid and
trace intensity levels.
INTENSITY GRID,<value>,TRACE,<value>
<value>:= 0(or 30) to 100
Note:
You can also set the intensity level of the grid or
trace using a key-value pair alone, see the
example for details.
INTENSITY?
INTENSITY TRACE,<value>,GRID,<value>
The following command changes the grid
intensity level to 75%.
Command message:
INTS GRID,75
INTENSITY | INTS
Command/Query
71