Teledyne T3DSO1000 Programming Manual page 140

SAVE
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
PANEL_SETUP | PNSU
The PANEL_SETUP command use the encoded
data get from "PNSU?" to set the panel setup.
The PNSU? query return the panel setup in
binary format from scope.
PANEL_SETUP <binary data>
<binary data>:= A setup previously read by
PNSU?
PANEL_SETUP?
PANEL_SETUP <binary data>
The following steps show how to use the query
and command to set the panel setup.
Step 1: Send the command to set the response
format.
Command message:
CHDR OFF
Step 2: Send the query to get the binary data of
setup.
Command message:
PNSU?
Response message:
<binary data>
Step 3: Change the panel setup, and then send
the command to restore setup get from step2.
Command message:
PNSU <binary data>
Step 4: You can also save the data in step 2 to a
text file and make it easier to recall later. The
following program is used as a reference.
Command /Query
140