Teledyne T3DSO1000 Programming Manual page 179

WAVEFORM
DESCRIPTION
QUERY SYNTAX
RESPONSE FORMAT
RELATED COMMANDS
EXAMPLE
Digital Oscilloscope Series
WAVEFORM? | WF?
The WAVEFORM? query transfers a
waveform from the oscilloscope to the
controller.
Note:
The format of the waveform data depends
on the current settings specified by the last
WFSU command.
<trace>:WAVEFORM? <section>
<trace>:={C1,C2,C3,C4,MATH,D0,D1,D2,
D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D1
3,D14,D15}
• C[X] — Analog channel.
• D[X] — Digital channel. Only valid for
T3DSO1000 series.
• MATH — Valid except for the FFT
waveform and only valid for T3DSO1000
series.
<section>:={DAT2}
• DAT2 — Return the main data include
the head, the wave data and the ending flag.
The length of data is current memory depth.
<trace>:WAVEFORM <data block>
WFSU
For T3DSO1000 series, the following steps
show how to use the command to
reconstitute the display of waveform.
For analog channel waveform:
Query
179