DIGITAL
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
DIGITAL_STATE | DGST
The DIGITAL_STATE command is used to set
the state of digital.
The DIGITAL_STATE? query returns the state
of digital.
DIGITAL_STATE <state>
<state>:={OFF,ON}
DIGITAL_STATE?
DIGITAL_STATE <state>
For T3DSO2000 series, the following command
sets Digital function on.
Command message:
DGST ON
Valid?
yes
no
Command /Query
60