Teledyne T3DSO1000 Programming Manual page 142

SAVE
DESCRIPTION
COMMAND SYNTAX
Digital Oscilloscope Series
STORE_PANEL | STPN
The STORE_PANEL command stores the
complete front-panel setup of the instrument
into a file on the specified-DOS path
directory in a USB memory device.
See the command "*SAV" for internal
storage.
STORE_PANEL
DISK,<device>,FILE,‗<filename>'
<device>:= {UDSK}
<filename>:= A waveform file under a legal
DOS path.
Models
T3DSO1000
Others
Note:
• See models on
page
• For T3DSO1000 series, the '/' character
to define the root directory is not supported.
• As shown below, during the execution of
the command, a progress bar will appear on
the interface. When the progress is finished,
there will be a prompt message.
Command
Description
The filename string is
up to eight characters,
with the extension
".xml".
The filename string is
up to eight characters,
with the extension
".set".
14.
142