RECALL
DESCRIPTION
COMMAND SYNTAX
Digital Oscilloscope Series
RECALL_PANEL | RCPN
The RECALL_PANEL command recalls a
front-panel setup from the specified-DOS
path directory in an external memory
device.
See the command "*RCL" for recalling
from internal.
RECALL_PANEL
DISK,<device>,FILE,'<filename>'
<device>:= {UDSK}
<filename>:= A waveform file under a legal
DOS path.
Models
T3DSO1000
Others
Note:
• See models on
page
• For T3DSO1000 series, the '/' character
to define the root directory is not supported.
• As shown below, when the progress is
finished, there will be a prompt message.
Command
Description
The filename string is
up to eight characters,
with the extension
".xml".
The filename string is
up to eight characters,
with the extension
".set".
14.
126