Teledyne T3DSO1000 Programming Manual page 54

QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
RELATED COMMANDS
Digital Oscilloscope Series
Note:
• The horizontal position range is related to the
size of screen.
• You need to add the unit to the position value.
<trace>:CURSOR_SET?
<cursor>[,<cursor>[,<cursor>[,<cursor>]]]
<cursor>:={VREF,VDIF,TREF,TDIF,HREF,H
DIF}
<trace>:CURSOR_SET
<cursor>,<position>[,<cursor>,<position>[,<cur
sor>,<position>]]]
• When the current time base is 1 us, vdiv is 500
mV, the cursor mode is manual, the following
command sets the X1 positions to -3 DIV, Y2
position to −1 DIV, using Channel 1 as a reference.
Command message:
C1:CRST TREF,-3us,VDIF,-500mV
• When the current time base is 1 us, the cursor
mode is track, the following command sets the X1
positions to -1 DIV, X2 position to 2 DIV, using
Channel 1 as a reference.
Command message:
C1:CRST HREF,-1us,HDIF,2us
CRMS
CRVA?
<cursor>,<position>[,
54