Teledyne T3DSO1000 Programming Manual page 80

MATH
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
The DEFINE command sets the desired
waveform math operation.
The DEFINE? query returns the current
operation for the selected function.
DEFINE EQN,'<equation>'
Note:
<equation> is the mathematical expression,
enclosed by single or double quotation marks.
Function Equations
<source1> + <source2>
<source1> - <source2>
<source1>*<source2>
<source1>/<source2>
FFT<source>
INTG<source>
DIFF<source>
SQRT<source>
<source>:={C1,C2,C3,C4}
<source1>:={C1,C2,C3,C4}
<source2>:={C1,C2,C3,C4}
DEFINE?
DEFINE EQN,'<equation>'
•When the Math function is on, and both
Channel 1 and Channel 2 are on, the following
command sets the math operation to
Multiplication, source1 to C1, source2 to C2.
Command message:
DEFINE EQN,'C1*C2'
• When the Math function is on, and Channel 1
DEFINE | DEF
Command /Query
Addition
Subtraction
Multiplication
Ratio
FFT
Integral
Differentiator
Square Root
80