Teledyne T3DSO1000 Programming Manual page 134

REFERENCE
DESCRIPTION
COMMAND SYNTAX
EXAMPLE
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
The REF_SAVE command saves the
waveform (screen range) of the specified
source as the reference waveform of the
current reference channel to the memory
and displays it on the screen.
REF_SAVE
When the Reference function is on, the REF
source is Channel 2, and the REF location is
REFA, the following command saves
Channel 2 as REFA and displays REFA on
screen.
Command message:
REFSA
Valid?
no
yes
REF_SAVE | REFSA
Command
134