Teledyne T3DSO1000 Programming Manual page 108

Digital Oscilloscope Series
Query message:
C1:PAVA? ALL
Response message:
C1:PAVA MAX,2.04E+00V,MIN,-
2.16E+00V,PKPK,4.20E+00V,TOP,2.00E+00V,
BASE,-2.08E+00V,AMPL,4.08E+00V, MEAN,-
1.95E-02V,CMEAN,-6.30E-
03V,STDEV,1.46E+00V,VSTD,1.46E+00V ,RMS,
1.46E+00V,CRMS,1.46E+00V,OVSN,1.96%,FP
RE,0.98%,OVSP,0.98%,RPRE,0.00%,LEVELX,0
.00E+00V,PER,4.00E08S,FREQ,2.5 0E+07Hz,P
WID,****,NWID,****,RISE,4.29E-
01S,FALL,1.14E-08S,WID,9.99E-
08S,DUTY,****,NDUTY,****,DELAY,-6.01E-
08S,TIMEL,3.97E-08S
•
The following steps show how the user
customize the measurement parameters and get the
measured value.
Step 1: Send the command to set the measurement
parameter.
Command message:
PACU PKPK,C1
Step 2: Send the query to get the measured value.
Query message:
PAVA? CUST1
Response message:
PAVA CUST1:C1,PKPK,4.08E+00V
Step 3: You can also send the query to get the
measured value.
Command message:
PAVA? CUSTALL
Response message:
PAVA
CUST1:C1,PKPK,4.08E+00V;CUST2:OFF;CU
ST3:OFF;CUST4:OFF;CUST5:OFF
108