Teledyne T3DSO1000 Programming Manual page 109

Digital Oscilloscope Series
• The following steps show how to get the
statistical values of user defined measurement
parameters.
Step 1: Send the command to set the measurement
parameter as the first customized parameter.
Command message:
PACU FREQ,C3
Step 2: Send the query to get the statistical values
of the first customized parameter.
Query message:
PAVA? STAT1
Response message:
PAVA STAT1 C3
FREQ:cur,1.00E+06Hz,mean,1.00E+06Hz,min,
9.97E+05Hz,max,1.00E+06Hz,std -
dev,1.41E+03Hz,count,171
PACU
RELATED COMMANDS
MEAD
109