Teledyne T3DSO1000 Programming Manual page 77

HISTORY
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
HISTORY_MODE | HSMD
The HISTORY_MODE command is used to set
the state of history mode.
The HISTORY_MODE? query returns the
current state of history mode.
HSMD <state>
<state>:={ON,OFF}
HSMD?
HSMD <state>
The following command sets the state of history
mode to ON.
Command message:
HSMD ON
Valid?
no
yes
Command/ Query
77