Teledyne T3DSO1000 Programming Manual page 120

PASS/FAIL
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
The PF_SOURCE command sets measurement
sources for Pass/Fail test.
The PF_SOURCE?
measurement source for Pass/Fail test.
PF_SOURCE <trace>
<trace>:={C1,C2,C3,C4}
PF_SOURCE?
PF_SOURCE <trace>
The following command sets the measurement
source to Channel 1 when Channel 1 is on.
Command message:
PFSC C1
Valid?
no
yes
PF_SOURCE | PFSC
Command/Query
query returns the
120