Teledyne T3DSO1000 Programming Manual page 125

RECALL
DESCRIPTION
COMMAND SYNTAX
EXAMPLE
RELATED COMMANDS
Digital Oscilloscope Series
The *RCL command recalls
front-panel setup of the instrument from
internal memory, using one of the twenty non-
volatile panel setups. This command is
opposite to the command *SAV.
See the command RCPN for recalling the
setup from external.
*RCL <setup_num>
<setup_num>:= 0 to 20.
Note:
• When setup_num is 0, it will recall the
default panel setup.
• As shown below, when the progress is
finished, there will be a prompt message.
When you have stored the instrument setup in
No.3, the following command recalls the setup
3.
Command message:
*RCL 3
RCPN
*SAV
*RCL
Command
the complete
125