Teledyne T3DSO1000 Programming Manual page 159

TIMEBASE
Command /Query
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
Digital Oscilloscope Series
HOR_POSITION | HPOS
The HOR_POSITION command sets the
horizontal position in the zoomed (delayed) view
of the main sweep. The main sweep range and
the main sweep horizontal position determine the
range for this command. The value for this
command must keep the zoomed view window
within the main sweep range.
The HOR_POSITION? query the current
horizontal window position setting in the
zoomed view.
Format 1:
HOR_POSITION <position>
<position>:= time value with unit.
Note:
• You need add the time unit(s/ms/us/ns) to the
position. If there is no unit added, it defaults to
be S.
• The range of position is related to the main
sweep range and the main sweep horizontal
position. The range after magnifying which
beyond the screen could display, and it will be
adjusted to the proper value.
Format 2:
HOR_POSITION <factor_div>
< factor_div>:= the factor of zoomed time base.
Note:
The table on next page shows the available
format in each oscilloscope series.
HOR_POSITION?
HOR_POSITION <position>
<position>:= Numerical value in E-notation with
SI unit.
159