Teledyne T3DSO1000 Programming Manual page 49

CHANNEL
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
The INVERTSET command mathematically
inverts the specified traces or the math waveform.
The INVERTSET? query returns the current state
of the channel inversion.
<trace>:INVERTSET <state>
<trace>:={C1,C2,C3,C4,MATH}
<state>:= {ON,OFF}
<trace>:INVERTSET?
<trace>:INVERTSET <state>
The following command inverts the trace of
Channel 1.
Command message:
C1:INVS ON
INVERTSET | INVS
Command/Query
49