Teledyne T3DSO1000 Programming Manual page 90

RELATED COMMANDS
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
Command message:
FFTP 28mV
• When the Math function is on, the operator is
FFT, and the scale is 5 V, the following steps set
the offset of FFT waveform to -13.5 V.
Step 1: Send command to set the scale unit to
Vrms.
Command message:
FFTU VRMS
Step 2: Send command to set the offset to -
13.5V
Command message:
FFTP -13.5V
FFTS
FFTU
Valid?
no
yes
90