Teledyne T3DSO1000 Programming Manual page 61

DIGITAL
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
Digital Oscilloscope Series
DIGITAL_THR | DGTH
The DIGITAL_THR
threshold for the specified group of channels.
The threshold is used for triggering purposes and
for displaying the digital data as high (above the
threshold) or low (below the threshold).
The DIGITAL_THR?
threshold value for the specified group of
channels.
<group>:DIGITAL_THR <type>[,<level>]
<group>:={C1,C2}
• C1 — D0-D7.
• C2 — D8-D15.
<type>:={TTL,CMOS,CMOS3.3,CMOS2.5,CU
STOM}
<level>:= -5V to 5V when <type> is CUSTOM.
Note:
• If there is no unit(V) added to <level>, it
defaults to be V.
• If you set the threshold to a value outside of
the legal range, the threshold is automatically
set to the nearest legal value.
<group>:DIGITAL_THR?
Format 1:
DIGITAL_THR <type>
Format 2:
DIGITAL_THR <group>:<level>
<type>
TTL/CMOS/CM
OS3.3/CMOS2.5
CUSTOM
Command /Query
command sets
query returns
Response Format
Format 1
Format 2
61
the
the