Teledyne T3DSO1000 Programming Manual page 116

PASS/FAIL
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPL
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
The PF_ENABLE command enables or disables
the Pass/Fail test features.
The PF_ENABLE? query returns the current
state of mask test features.
PF_ENABLE <state>
<state>:= {ON,OFF}
• ON — Enables the mask test features.
• OFF — Disables the mask test features.
PF_ENABLE?
PF_ENABLE <state>
The following command enables mask test
features.
Command message:
PFEN ON
Valid?
no
yes
PF_ENABLE | PFEN
Command /Query
116