Teledyne T3DSO1000 Programming Manual page 75

HISTORY
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
The FRAME_SET command is used to set
history current frame number.
The FRAME_SET? query returns the current
frame number.
FRAM <frame_num>
<frame_num>:= 0 to the max frame number.
Note:
You can send the query FRAM? to get the max
frame number when the history function is
turned on for the first time.
FRAM?
FRAM <frame_num>
Note:
The query is only valid for T3DSO1000 series.
When the history function is on, the following
command sets current frame number to 50. Then
you can see the response on the screen as shown
below.
Command message:
FRAM 50
FRAME_SET | FRAM
Command/ Query
75