Teledyne T3DSO1000 Programming Manual page 46

CHANNEL
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
The TRACE command turns the display of the
specified channel on or off.
The TRACE? query returns the current display
setting for the specified channel.
<trace>:TRACE <mode>
<trace>:={C1,C2,C3,C4}
<mode>:={ON,OFF}
<trace>:TRACE?
<trace>:TRACE <mode>
The following command displays Channel 1.
Command message:
C1:TRA ON
TRACE | TRA
Command/Query
46