Teledyne T3DSO1000 Programming Manual page 176

TRIGGER
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
RELATED COMMANDS
Digital Oscilloscope Series
TRIG_SLOPE | TRSL
The TRIG_SLOPE command sets the trigger
slope of the specified trigger source.
The TRIG_SLOPE? query returns the trigger
slope of the selected source.
<trig_source>:TRIG_SLOPE <trig_slope>
<trig_source>:={C1,C2,C3,C4,EX,EX5}
<trig_slope>:={NEG,POS,WINDOW} for
edge trigger.
<trig_slope>:={NEG,POS} for other trigger.
• NEG — falling edge.
• POS — rising edge.
• WINDOW — altering edge.
<trig_source>:TRIG_SLOPE?
<trig_source>:TRIG_SLOPE <trig_slope>
The following command sets the trigger slope
of Channel 2 to negative.
Command message:
C2:TRSL NEG
TRSE
Command /Query
176