Teledyne T3DSO1000 Programming Manual page 137

REFERENCE
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Note:
The table below shows the availability of command in each oscilloscope series.
Model
T3DSO2000
T3DSO1000
Digital Oscilloscope Series
REF_SOURCE | REFSR
The REF_SOURCE command sets the
reference waveform source.
The REF_SOURCE? query returns the
source of the current reference channel.
REF_SOURCE <source>
<source>:= {C1,C2,C3,C4,MATH}
REF_SOURCE?
REF_SOURCE <source>
When Channel 1 is on, the following
command selects Channel 1 as the source of
current reference channel.
Command message:
REFSR C1
Valid?
no
yes
Command /Query
137