Teledyne T3DSO1000 Programming Manual page 85

MATH
Command/Query
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
RELATED COMMANDS
Digital Oscilloscope Series
MATH_VERT_POS | MTVP
The MATH_VERT_POS command sets the
vertical position of the math waveform with
specified source.
The FFT waveform isn't included, but we have
another command which called FFTP to set
vertical position.
The MATH_VERT_POS? query returns the
vertical position of the math waveform.
MATH_VERT_POS <point>
<point>:= -255 to 255.
Note:
The point represents the screen pixels and is
related to the screen center. For example, if the
point is 50. The math waveform will be
displayed 1 grid above the vertical center of the
screen. Namely one grid is 50.
MATH_VERT_POS?
MATH_VERT_POS <point>
When the Math function is on, the following
command sets the vertical position of the math
waveform to 1 grid above the screen vertical
center.
Command message:
MTVP 50
FFTP
85