Teledyne T3DSO1000 Programming Manual page 171

TRIGGER
DESCRIPTION
COMMAND SYNTAX
(FOR ALL BUT TV)
Digital Oscilloscope Series
TRIG_SELECT | TRSE
The TRIG_SELECT command selects the
condition that will trigger the acquisition of
waveforms.
Depending on the trigger type, additional
parameters must be specified. These additional
parameters are grouped in pairs. The first in
the pair names the variable to be modified,
while the second gives the new value to be
assigned. Pairs may be given in any order and
restricted to those variables to be changed.
The TRIG_SELECT?
current trigger condition.
Parameter
SLEW Slope
GLIT Glitch/
Pulse
INTV Interval
DROP Dropout
SR Source
TI Time
HT H o l d
type/
Limit
range
HV Hold
value/
Limit
value
TRIG_SELECT
<trig_type>,SR,<source>,HT,<hold_type>,H
V,<hold_value1>[,HV2,<hold_value2>]
Command /Query
query returns
description
IL Interval
larger
IS Interval
smaller
I2 Interval
in range
I1 Interval
out of
range
P
Pulse
PL
L
larger
PS P u l s e
smaller
P2 Pulse in
range
P1 Pulse out
of range
171
the