Teledyne T3DSO1000 Programming Manual page 23

COMM_HEADER
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
COMM_HEADER | CHDR
The COMM_HEADER command controls the
way the oscilloscope formats response to
queries. This command does not affect the
interpretation of messages sent to the
oscilloscope. Headers can be sent in their long or
short form regardless of the CHDR setting.
Examples of the three response formats to
"C1:VDIV?":
CHDR
LONG C1:VOLT_DIV 1.00E+01V
SHORT C1:VDIV 1.00E+01V
OFF 1.00E+01
COMM_HEADER <mode>
<mode>:={SHORT,LONG,OFF}
• SHORT — response starts with the short form
of the header word.
• LONG — response starts with the long form
of the header word.
• OFF — header is omitted from the response
and units in numbers are suppressed.
Note:
Default is the SHORT response format.
COMM_HEADER?
COMM_HEADER <mode>
The following command sets the response
header format to SHORT.
Command message:
CHDR SHORT
Command/ Query
RESPONSE
23