Teledyne T3DSO1000 Programming Manual page 127

EXAMPLE
RELATED COMMANDS
Digital Oscilloscope Series
• As shown below, if the filename is wrong,
there will be a prompt message.
• For T3DSO1000 series, when you plug in
an U-disk to the oscilloscope, the following
command recalls the front-panel setup from a
file called "TEST.xml" in root directory of
the USB memory device.
Command message:
RCPN DISK,UDSK,FILE,'TEST.xml'
• For T3DSO1000 series, when you plug in
an U-disk to the oscilloscope, the following
command recalls the front-panel setup from a
file called "TEST.xml" in specified-directory
of the USB memory device.
Command message:
RCPN
DISK,UDSK,FILE,'/SAVE/TEST.xml'
STPN
*RCL
127