Teledyne T3DSO1000 Programming Manual page 177

TRIGGER
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
RELATED COMMANDS
Digital Oscilloscope Series
TRIG_WINDOW | TRWI
The TRIG_WINDOW command sets the
relative height of the two trigger line of the
trigger window type.
Note:
This command is only valid when the window
type is relative.
The TRIG_WINDOW? query returns relative
height of the two trigger line of the trigger
window type.
TRIG_WINDOW <value>
<value>: 0 to 9*DIV when the center level is
0.
Note:
• You need add the volt unit(V/mV) to the
value. If there is no unit added, it defaults to
be V.
• The range of value is related to the center
value of the level.
TRIG_WINDOW?
TRIG_WINDOW <value>
<value>:= Numerical value in E-notation with
SI unit.
When the window type is relative, and the
center level is 1 V, the following command
sets the relative height of the two trigger line
to 2 V.
Command message:
TRWI 2V
TRLV
TRLV2
Command /Query
177