Teledyne T3DSO1000 Programming Manual page 143

Digital Oscilloscope Series
• For T3DSO1000 series, the following
EXAMPLE
command saves the current setup to root
directory of the USB memory device in a file
called "TEST.xml". Then you can see the file
on PC.
Command message:
STPN DISK,UDSK,FILE,'TEST.xml'
• For T3DSO1000 series, the following
command saves the current setup to
specified-directory of the USB memory
device in a file called "TEST.xml". Then you
can see the file on PC.
Command message:
STPN DISK,UDSK,FILE,'/SAVE/TEST.xml'
143