Teledyne T3DSO1000 Programming Manual page 151

SYSTEM
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
Digital Oscilloscope Series
COMM_NET | CONET
The COMM_NET command sets the IP address
of the oscilloscope's internal network interface.
When using this command, DHCP should be off.
The COMM_NET? query returns the IP address
of the oscilloscope's internal network interface.
COMM_NET
<ip_add0>,<ip_add1>,<ip_add2>,<ip_add3>
< ip_add0 >:= 1 to 223(except 127).
< ip_add1 >:= 0 to 255.
< ip_add2 >:= 0 to 255.
< ip_add3 >:= 0 to 255.
COMM_NET?
COMM_NET
<ip_add0>,<ip_add1>,<ip_add2>,<ip_add3>
The following command sets the IP address to
10.11.0.230.
Command message:
CONET 10,11,0,230
Command /Query
151