Chapter 3: Assembling Header; Removing Lower Shipping Support - MacDon R113 Unloading And Assembly Instructions

Chapter 3: Assembling Header

Perform procedures in the order in which they are presented.

3.1 Removing Lower Shipping Support

The skid shoes on both sides of the header must be lifted out of the way to remove the base support.
1. Support wood brace (B), cut three shipping straps (A), and
then remove the wood brace.
2. Remove four bolts (A) on both vertical fork channels (B),
and then remove the vertical fork channels.
262300
B
Figure 3.1: Shipping Support
A
Figure 3.2: Vertical Fork Channels
11
A
B
A
Revision A