Monitoring And Setting Using The Cip Message Communications And Examples Of Communications Instructions - Omron K6CM User Manual

8 Monitoring and Setting Using the EtherNet/IP Devices
8-3 Monitoring and Setting Using the CIP
Message Communications and
Examples of Communications
Instructions
This section shows the contents of monitoring and setting using the CIP message communications and
examples of communications instructions.
8-3-1 Datatype List of Variables
This section describes the data types of variables used in the CIP message communications.
Data type
USINT
UINT
UDINT
BOOL
SHORT_STRING
STRING
WORD
DWORD
8-3-2 Services Supported by Objects in K6CM
The services supported by the objects in K6CM device are as follows.
Object name
Monitor object
Setting object
Identity object
TCP/IP Interface object
8 - 12
Description
Unsigned 1 byte BIN
Unsigned 1 word BIN
Unsigned 2 words BIN
1 bit
Data size (1 byte) + 1 byte character string
Data size (2 bytes) + 1 byte character string
1 word hex
2 words hex
Class ID
370 hex Reading the measurement values and other current values of the
K6CM.
371 hex Writing and reading the alarm setting values and other setting values
of the K6CM.
01 hex Reading the identification information of the K6CM.
Reading and resetting the state of the built-in EtherNet/IP port.
F5 hex Writing and reading of TCP/IP settings of the K6CM.
Contents
K6CM Motor Condition Monitoring Device User's Manual (N219)