Monitoring And Setting Using The Cip Message Communications And Examples Of Communications Instructions; Services Supported By Objects In K6Cm; K6Cm Monitor Object (Class Id: 370 Hex) - Omron K6CM User Manual

8-3 Monitoring and Setting Using the CIP
Message Communications and
Examples of Communications
Instructions
This section shows the contents of monitoring and setting using the CIP message communications and
examples of communications instructions.
8-3-1

Services Supported by Objects in K6CM

The services supported by the objects in K6CM device are as follows.
Object name
K6CM Monitor object
K6CM setting object
8-3-2

K6CM Monitor Object (Class ID: 370 hex)

This object reads the measurement value of K6CM device and other current values.
Service Codes
Service code
01 hex
0E hex
Class ID
Specify 370 hex.
Instance ID
Specify 01 hex.
K6CM Motor Condition Monitoring Device User's Manual (N219)
Class ID
370 hex Reads the measurement value of K6CM and other current values.
371 hex Writes the set value (alarm setting value and other set values) of the
K6CM.
Service name
Get_Attributes_All Reads the values of all attributes.
Get_Attribute_Single Reads the value of the specified
attribute.
8 Monitoring and Setting with the EtherNet/IP
Function
Description
Supported services
Classes Instances
Not supported. Supported.
Not supported. Supported.
8 - 11
8