Omron K6CM User Manual page 200

8 Monitoring and Setting Using the EtherNet/IP Devices
PC (Sysmac Studio installed)
PLC and SD Memory Card (operation confirmed in NJ/NX-series)
Sample program project file (***. Smc 2)
Network Configuration Example
Each setting is required to prevent the IP address duplication.
PLC
IP: 192.168.250.1
PC
IP: 192.168.250.2
File Specifications of Output CSV
The specifications of the CSV file output to the SD Memory Card of the PLC are shown below.
At the beginning of the CSV file, there is a K6CM device profile data, and collection time stamps and
collected data are output following it.
Collection
time
stamps
K6CM Device Profile Data
IP Prod- Mea- Main
addre uct sure- CPU
ss name ment ver-
CPU sion
Ver-
sion
*1. Specific to the K6CM type
K6CM-VBMx
K6CM-ISMx
K6CM-CIMx
8 - 30
SW hub
K6CM
IP: 192.168.250.101 IP: 192.168.250.102
K6CM device profile data
Collection data
for 1st K6CM
Common to K6CM all models
EIP Soft- Maxi- Dis-
CPU ware mum play
ver- reset and value
sion Mini- type
mum
Reset
Temperature unit
Applicable circuit
Current range
SW hub
K6CM K6CM
IP: 192.168.250.103
Trig- Trig- Trig- Moni-
ger ger ger tor-
mode type level ing
time
Using inverter Inverter special measurement
K6CM Motor Condition Monitoring Device User's Manual (N219)
K6CM devices
(Any number of Units)
Collection data
for 2nd K6CM
Alarm Use Mov-
Tran-
latch Run- ing
sistor
ning aver-
out-
Time age put
times type
Spe-
cific
to
the
K6C
M
type
*1