Overview; What Is The Motor Condition Monitoring Tool (Software Tool) For - Omron K6CM User Manual

4 Introduction of the Software Tool
4-1

Overview

The software tool can display the setting of K6CM devices and the current value display, and automatic
logging and history display.
4-1-1

What is the Motor condition monitoring Tool (Software Tool) for?

Overview
Connect the Motor condition monitoring Tool (hereinafter referred to as software tool) to the K6CM
device with an Ethernet cable, and then you can execute the following.
Setting up the K6CM devices
IP address, alarm setting, and other K6CM device settings are available.
Monitor current value of measurement value and alarm result
You can monitor the measured values and the current value of the alarm results for each motor,
K6CM device, and monitoring category.
Automatic logging and history display
Automatically logs the measured value and alarm result to the computer.
At the end of the software tool, the logging result is automatically output to a log file (CSV file).
Based on automatically logged data and log file (CSV file), history of measurement value and alarm
result is displayed.
* The project is saved along with the log file.
Setting up the K6CM Device
The following settings of the K6CM device are possible.
IP address
Alarm setting, and other K6CM device settings
4 - 2
Setting type
Software tool
• IP address
• Alarm settings, other device settings
Screen for setting
Create the project screen or Device setting screen
Create the project screen or Device setting screen
Download after creating project
Or
Download after device setup
Motor condition monitoring equipment
K6CM device
K6CM Motor Condition Monitoring Device User's Manual (N219)