Monitoring Screen And Setting Screen - Omron K6CM User Manual

6-1-2

Monitoring Screen and Setting Screen

The following screen types are supported.
Top level of screen
Monitoring Monitor screen
screen by motor
Monitoring by
monitoring cate-
gory screen
↓↑
Device setting screen
Parameters displayed on the monitoring screen are as follows. Each parameter can be read with the
software tool, it can also be read using the CIP message communications or the tag data link except for
some parameters.
Vibration & temperature Type (K6CM-VBM)
Data type Data name
Acceleration (Present,
Min., Max.)
Velocity (Present,
Min., Max.)
Motor temperature
(Present, Min., Max.)
Temperature Gap (Dif-
ference from the room
temperature of Motor
temperature) (Present,
Measure- Min., Max.)
ment Value
Acceleration status
Velocity status
Motor temperature
status
Temperature Gap sta-
tus
Comprehensive alarm
(Warning)
Alarm
Results
Comprehensive alarm
(Critical)
Acceleration, High
alarm (Critical and
Warning)
K6CM Motor Condition Monitoring Device User's Manual (N219)
Screen type
Medium level of screen
→ Detailed status screen by
← motor
↓↑
Bar display screen by moni-
→
toring category
←
Description
0.00 to 9.99 G (K6CM display)
0.00 to 45.00 mm/s (K6CM display)
0 to 80°C (32 to 176°F) (K6CM display)
0 to 80°C (32 to 176°F) (K6CM display)
Bit00: Present value unmeasured state
Bit01: Present value input error
Bit04: Maximum value unmeasured state
Bit05: Maximum value input error
Bit08: Minimum value unmeasured state
Bit09: Minimum value input error
Bit12: Individual alarm threshold setting
(Warning)
Bit13: Individual alarm threshold setting
(Critical)
In K6CM, there is no "Critical" in the
measurement value, and even one of
them has "Warning".
Transistor output, alarm bar (yellow) is
reflected
Within K6CM, there is "Critical" even if at
least one measured value.
Transistor output, reflected on alarm bar
(red)
ON, OFF
6 How to Use the Software Tool
Lower level of screen
→ Detailed status screen by device
←
Graph display screen by monitor-
→
ing category
←
Reading method (Yes: supported, No: supported)
Motor con- CIP mes-
K6CM dition sage com-
device monitor- municatio
ing Tool
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
No Yes
No Yes
No Yes
Yes (Alarm No Yes (K6CM
bar, and status or
transistor Measure-
output) ment sta-
Yes (Alarm No Yes (K6CM
bar, and status or
transistor Measure-
output) ment sta-
No Yes
Tag data
link
ns
6
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes (K6CM
status or
Measure-
ment sta-
tus) tus)
Yes (K6CM
status or
Measure-
ment sta-
tus) tus)
Yes Yes
6 - 5