4 Introduction of the Software Tool
Fixed IP Connection (connection via hub)
Connect the computer and each K6CM device with an Ethernet cable via the hub.
In the case of fixed IP connection, there are the following merits.
Fixed IP Connection is a method to connect by specifying the IP address of the K6CM device you want
to connect.
• Connectable with PC connected to multiple K6CM with Ethernet cable
Note Do not connect more than one K6CM device with the same IP address.
IP address may become duplicated and communication may fail.
Either straight type or cross type Ethernet cable is available.
Software tool
Ethernet cable
4 - 28
Device setting screen
Industrial switching hub
(Such as W4S1)
Motor condition monitoring equipment
K6CM device
K6CM Motor Condition Monitoring Device User's Manual (N219)
Parameter settings