Omron K6CM User Manual page 103

When not setting other devices
Turn OFF the check of "Possible to continue the setting of another device".
15
Click the [End] Button. The monitor screen shown below is displayed for each motor unit.
16
[Save the project file] or
Save Destination dialog box will be displayed.
17
Enter the directory and project name and click the [Save] Button. The following dialog box will
be displayed.
18
Click the [OK] Button.
K6CM Motor Condition Monitoring Device User's Manual (N219)
4 Introduction of the Software Tool
[Save the project as the specified name] Button. The following
4
4 - 37