Omron K6CM User Manual page 102

4 Introduction of the Software Tool
14
Click the [OK] Button.The following [Navigating is completed] wizard screen is displayed.
Continue to configure other devices
Turn ON the checkbox "Possible to continue the setting of another device"
15
Click the [End] Button.
The Device Connection wizard screen of the following [Start Navigation] Dialog Box is displayed
as in step 5.
16
Connect the Motor condition monitoring Tool directly to the other form K6CM one to one.
17
Perform the same operation as Step 8 and the following.
4 - 36
K6CM Motor Condition Monitoring Device User's Manual (N219)