Using The Ethernet/Ip - Omron K6CM User Manual

4. Monitoring
and operation
5. Troubleshoot
K6CM Motor Condition Monitoring Device User's Manual (N219)
Start measuring using the K6CMs.
Record measurement values from the host system (i.e., the
software tool, PC, or PLC) to estimate an alarm set value to
be used as the monitoring standard.
• With the software tool, set the "Monitoring cycle" by press-
ing the [Option] Button, before monitor via EtherNet/IP
and log the measurement values.
• With PC or PLC, Monitor via EtherNet/IP and log the mea-
surement values.
Estimate an alarm set values to be used as monitoring stan-
dard, considering the relationship between the change in
each measurement value and the fatal state of the motor.
Determine the alarm set values as the monitoring standard
based on the monitoring and operation results.
Change the setting of the alarm set values and make main
monitoring and operation.
Troubleshoot
↓
↓
↓
↓
▼
1 Overview
Section 3 Measuring
and Monitoring Mecha-
nism
Section 7 Motor Moni-
toring with the K6CM
Devices and the Soft-
ware Tool
Section 8 Monitoring
and Setting Using the
EtherNet/IP Devices
Section 9 Trouble
shooting
1 - 11
1